IP Watchdog Lite
IP WatchDog Lite monitors the function of Ethernet devices. Compared to the full version of IP Watchdog the IP WatchDog Lite detects the devices' functionality using only PING. If there is no response within a specified time period, IP WatchDog will RESET the device (or switch to a back-up communication circuit, set off an alarm etc.) A single WatchDog Lite device can independently monitor up to two devices, such as servers, routers, access and security systems.
Monitoring of remote device functions:
- IP Watchdog periodically pinged by monitored device
- Monitored device periodically pinged by IP watchdog
- Monitored device sends periodically defined string to RS-232 serial port.
Overview of the IP Watchdog
- Ethernet - RJ45 (10BASE-T - IEEE 802.3).
- Two independent relays intended to use two switching contacts to reset or start monitored devices
- One relay contact is always nonpotentional, the second is connected to WatchDog's power supply
- Manual control (Startup / Shutdown / Restart) of the monitored devices.
- Time synchronization from internet / intranet, using TIME, NTP/SNTP or DayTime protocols.
- Device configuration methods:
- WWW page configuration of device's reactions, including option of manual relay control.
- UDP Config configuration of basic network parameters (MASK, IP, Gateway).
- TCP Setup remote configuration of basic parameters in terminal over TCP.
- Access security and relay control:
- IP range - it is possible to define a range of IP addresses that can communicate with the device.
- User name and password - Access to WWW pages and TCP setup
- Power supply: 12-24 V AC or DC
- Dimensions: 35 x 101,5 x 76 [mm].
- SW: Wide range of examples and previews for Windows and Unix/Linux.
| Ordering No. | Product name | Device version |
|---|---|---|
| 600 218 | IP WatchDog Lite | IP Watchdog Lite full kit |
Would you like to talk to us about your requirements and how our products will work for you? Please CONTACT US