Industrial Security 1-port RS232/422/485 to 1-port 100FX Device Server
Features of the Serial to Fibre Server
- Redundant 5 multiple host devices supported to protect your industrial network
- SSH & HTTPS supported for secure management
- NAT router pass through, DDNS, IPTABLES, PPPoE supported
- Dual redundant DC power inputs
- Rigid IP-30 housing design
- Din-Rail and panel mounting enabled
IDS-5611F is an innovative 1 port RS232/422/485 to 1 port fibre optical security device server which offers many powerful features for SW redundant functions. IDS-5611F can simultaneously transfer SSL encryption data into 5 host PCs. This feature can assure all critical data that saved in different host PC to avoid Ethernet break or host PCs failure. Secondly, the IDS-5611F provides dual redundant power inputs on DC power jack and terminal block. IDS-5611F also provides NAT pass through function so that users are able to manage IDS-5611F inside or outside the NAT router. It is easy for different IP domain users to use IDS-5611F. Therefore, IDS-5611F is one of the best security communication redundant solutions for current application of serial devices with fibre optical interface.
| Physical Ports | |
|---|---|
| IDS-5611F-MM | 1 x 100Base-FX Multimode ports (2KM, 1310nm, SC connector) |
| IDS-5611F-SS | 1 x 100Base-FX Singlemode ports (30KM, 1310nm, SC connector) |
| Serial Ports | |
| Connector | DB9 x 1 |
| Operation Mode | RS232 / RS422 / 4(2)-Wire RS485. |
| Serial Baud Rate | 110 bps to 460.8 Kbps |
| Data bits | 5, 6, 7, 8 |
| Parity | Odd, Even, None, Mark, Space |
| Stop Bits | 1, 1.5, 2 |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND |
| RS-422 | Tx+,Tx-, Rx+, Rx-,GND |
| RS-485 (4-wire) | Tx+,Tx-, Rx+, Rx-,GND |
| Flow Control | XON/XOFF, RTS/CTS, DTR/DSR |
| LED Indicators | |
| Power Indicator | PWR 1(2) / Ready : Red On : Power is on and booting up. Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly. Green On : Power is on and functioning Normally. Green Blinking : Located by Administrator. |
| 100Base-FX with SC | Green for Port link/ACT at 100Mpbs |
| Serial TX / RX LEDs | Red - serial port receiving data Green - serial port transmitting data |
| Power | |
| Redundant input power | Dual DC inputs. 12-48VDC on 3-pin terminal block and power jack |
| Power Consumption (typ) | 4 Watts |
| Overload current protection | Present |
| Reverse polarity protection | Present on terminal block |
| Physical & Environmental | |
| Enclosure | IP-30 |
| Dimensions | 72x29.4x123.4 mm |
| Storage Temperature | -40C to +85C |
| Operating Temperature | -10C to +60C Standard |
| Operating Humidity | 5-95% Non-Condensing |
| Regulatory Approvals | |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| SHOCK | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950 |
